Fall Arrest

Shock-Absorbing Stretch Lanyard with Scaffold Hook and Galvanized Connector - EN-Certified Fall Arrest Component

• A unique stretchable design.
• A safety clip that straps on to the harness to hold the Manyard when not in use.
• Special woven shock-absorbing inner core.Heavy tubular outer jacket.
• Unique warning flag which provides visual proof that a lanyard has been involved in a fall and should be removed from service.
• Reliable visual inspection: the integral red core becomes visible if the outer jacket is damaged or worn.

Edge-Tested Shock-Absorbing Lanyard with 2 m Kernmantel Rope and Dual Steel Screw-Gate Karabiners - EN 355

• Fall arrest lanyards are designed to let a worker experience a controlled fall while preventing impact with the ground or lower levels when properly attached
• Each lanyard includes a shock absorber that limits force on the body to below 6 kN in the event of a fall

Edge-Tested Shock-Absorbing Lanyard with 1.5 m Kernmantel Rope, Steel Twist-Lock Karabiner & 55 mm Scaffold Hook - EN 355

• Fall arrest lanyards are designed to let a worker experience a controlled fall while preventing impact with the ground or lower levels when properly attached
• Each lanyard includes a shock absorber that limits force on the body to below 6 kN in the event of a fall

Edge-Tested Forked Shock-Absorbing Lanyard with 1.5 m Kernmantel Rope, Aluminum Twist-Lock Karabiner & Dual 63 mm Scaffold Hooks - EN 355

• Fall arrest lanyards are designed to let a worker experience a controlled fall while preventing impact with the ground or lower levels when properly attached
• Each lanyard includes a shock absorber that limits force on the body to below 6 kN in the event of a fall

Arc-Flash-Resistant Single-Leg Shock-Absorbing Lanyard with 1.8 m Polyamide Webbing and 65 mm Rebar Hook - EN 354 / EN 355 / ASTM F887-20

• The new generation Miller H500 Arc Flash revolves around four critical worker-centric value drivers: ergonomic safety, lightweight, style and evidence-based performance, allowing workers to wear the harness for hours without having to readjust constantly throughout their shifts.
• The Miller H500 Arc Flash harness and lanyard are ASTM F887 third-party tested to ensure workers are protected from falls even after an arc flash of 40 cal/cm².
• INDUSTRIES: Construction, Utilities, Manufacturing, Civil engineering, Railway
• ARC-FLASH LANYARD: The Miller® H500 Arc Flash Lanyard is designed to protect your workers from fall even after an electric arc energy of 40 cal/cm².
• Electric arc-resistant tape. Protected label pouch. Energy absorber. Harness connection point made with electric-arc-resistant tape. Hook with 65 mm opening. Length: 1.8m

Arc-Flash-Resistant Twin-Leg Shock-Absorbing Lanyard with 1.8 m Polyamide Webbing and Dual 65 mm Rebar Hooks - EN 354 / EN 355 / ASTM F887-20

• The new generation Miller H500 Arc Flash revolves around four critical worker-centric value drivers: ergonomic safety, lightweight, style and evidence-based performance, allowing workers to wear the harness for hours without having to readjust constantly throughout their shifts.
• The Miller H500 Arc Flash harness and lanyard are ASTM F887 third-party tested to ensure workers are protected from falls even after an arc flash of 40 cal/cm².
• INDUSTRIES: Construction, Utilities, Manufacturing, Civil engineering, Railway
• ARC-FLASH LANYARD: The Miller® H500 Arc Flash Lanyard is designed to protect your workers from fall even after an electric arc energy of 40 cal/cm².
• Electric arc-resistant tape. Protected label pouch. Energy absorber. Harness connection point made with electric-arc-resistant tape. Hook with 65 mm opening. Length: 1.8m

3M™ DBI-SALA® Expander Lanyards - 2M - 1245541

• Use 3M™ DBI-SALA® EZ-Stop™ Expander Shock Absorbing Lanyard with a 3M fall arrest harness as part of a complete fall protection system
• Elasticated webbing reduces lanyard length when not under tension reducing the risk of trip and snagging hazards
• Compact and lightweight shock pack design
• Fully covered identification labels for long-term identification and inspection

FALL ARREST, 3M LANYARD, DBI-SALA® TWIN LEG SHOCK ABSORBING LANYARD 2M - 1245569

• Use 3M™ DBI-SALA® EZ-Stop™ Scaffolders Lanyard as part of a complete fall arrest system, where the worker needs complete freedom to move around the work site
• Elasticated webbing reduces lanyard length when not under tension reducing the risk of trip and snagging hazards
• Compact and lightweight shock pack design
• Fully covered identification labels for long-term identification and inspection

• Use with a 3M fall arrest harness as part of a complete fall protection system
• 140 kg max. rated weight capacity – higher than standard fall arrest lanyards
• Elasticated webbing reduces lanyard length when not under tension reducing the risk of trip and snagging hazards
• Small, compact shock absorber pack means less bulk for the user carry
• Fitted with two Steel Scaffold Hooks ad an Oval carabiner

• Use with a 3M fall arrest harness as part of a complete fall protection system
• 140 kg max. rated weight capacity - higher than standard fall arrest lanyards
• Elasticated webbing reduces lanyard length when not under tension reducing the risk of trip and snagging hazards
• Small, compact shock absorber pack means less bulk for the user carry